Armor WL550 Matte Wet Look Concrete, Brick, and Paver Sealer

Description

The Armor WL550 is a solvent based water repellent sealer that penetrates deep into the surface where it chemically reacts to form a hydrophobic barrier within the pores.  The hydrophobic barrier, which can last for up to 10 years, will reduce surface water absorption by up to 95%. Surfaces sealed with the Armor WL550 instantly become more resistant to the damaging effects of water absorption, such as cracking, spalling, pitting, freeze thaw and ice damage, staining, mold and mildew growth, and the formation of efflorescence. The Armor WL550
also works to darken and enhance any dull and faded surfaces, providing a matte wet look finish. The Armor WL550 is the perfect matte wet look sealer for unsealed concrete, brick, pavers, and natural stone. Prefer a low or high gloss instead of a matte finish? Consider instead the Armor AR350 for a low gloss, or the Armor AR500 for a high gloss.
Benefits:
Manufactured in the USA
Will maintain the natural, unsealed feel of the substrate
Breathable, low VOC
Will provide up to 5 years of life before the need for a recoat
Will reduce deterioration caused by water absorption such as cracking, spalling, pitting, staining
Will reduce the formation of efflorescence
Will reduce the formation of mold and mildew
Will reduce freeze-thaw and salt damage
Will reduce the movement of moisture through the concrete pores
Will darken the substrate without leaving behind a glossy surface film
Will provide a true matte finish
Coverage:
Porous Substrates  125-175ft²/gallon in one coat. Dense, Trowel Finished Substrates  250-350ft²/gallon in one coat
. One coat suggested. Coverage rates may vary depending on surface porosity. Actual surface darkening will depend on several factors including substrate type, porosity, and amount of material applied.