MD40 Magnetic Drill Press Boring Magnet Force 2700LBS 1-1/2" SALE

Description

Store category
Sign Up Now !
You may also like
Product Description
Applications:
Applicable to steel structure, shipbuilding, equipment manufacturing, equipment installation, bridge engineering, wind power, drilling rig, power construction, railway manufacturing, etc.
Magnetic drill maintenance:
This can be seen in the development of magnetic drill in the precision required. we, ordinary operators, to understand his basic principles, But in this aspect of the magnetic drill repair, the better is professional disassembly assembly or maintenance. On the one hand, magnetic drill internal power generated high Voltage, non-professionals may get into life-threatening, the other aspect, the magnetic drilling precision is possible to be affected by the non-professional assembly.
CAUTION: Make sure to turn off the switch and unplug the power cor, before checking and maintaining.
1, Magnetic drill should be stored in a dry, clean, no corrosive gases and where children can not touch.
2, Save every part in the demolition of the magnetic drill, and when assembly it is good to put in the original parts.
3, Magnetic drill parts should be often injected into the lubricating oil and keep clean.
4, Magnetic drill maintenance should always be checked regularly, must check the power lines, plugs, etc.
The Introductions of the steel Z3040 Magnetic Drill:
This magnetic drill press will attach directly to the metal drilling surface with a powerful electromagnet. The electromagnet has 2,700 lbs. of max force and ensures the machine will not move during the drilling process. A secured magnetic drill press provides more leverage than a hand drill, allowing the operator to cut even, consistent holes. The magnet also allows the drill to operate upside down.
Feature
Magnetic Drill:
Suitable for drilling on any metal surface.
Rack and pinion gear system for exact drilling depth.
One 2 years warranty against manufacturer defect.
Annular Cutter:
SDT annular cutters will drill large holes up to ten times faster than regular drill bits.
Machine-finish hole with no reaming needed when using a lubricant.
Make overlapping holes, slotting holes, and edge cuts.
Bit size is etched on each cutter.
The pilot pin helps locate the center of the hole location.
The pilot pin helps eject the slug after drilling is complete.
During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.
Specifications
Motor: High-Speed Series
Max Magnetic Force: 2,700 Lbs(12,000 N)
Maximum Boring Depth: 50mm
Twist drill diameter：1.5-13mm
Opening range diameter：12-40mm
Spindle Speed: 550 RPM
Overall Weight: 14kg
Rated voltage: 110V
Rated frequency: 60Hz
Rated input power: 1100W
Max.travel: 180mm
Package Content
1 X Z3040 Magnetic Drill
{{titlepaymentterms}}
{{titleshippingterms}}
{{titlesalesterms}}
{{titleaboutus}}
{{titlecontactus}}
{{titlepaymentterms}}
{{paymentterms}}
{{titleshippingterms}}
{{shippingterms}}
{{titlesalesterms}}
{{salesterms}}
{{titleaboutus}}
{{aboutus}}
{{titlecontactus}}
{{contactus}}
On Jul-03-21 at 02:37:08 PDT, seller added the following information: